HIGH PERFORMANCE COATINGS -Architectural
Durethane® DTM
Durethane® is a surface-tolerant, high solids, high build two-component acrylic urethane formulated for direct-to-metal application. This product is Low-VOC compliant; for professional use only.
Read More
Pitthane® Ultra Gloss Urethane Enamels
Pitthane® Ultra urethane enamels are recommended as topcoats where color and gloss retention are the highest priority. This product provides exceptional chemical and heat resistance. For professional use only.
Read More
PIT-TECH® Plus Interior/Exterior Satin DTM Industrial Enamel
PIT-TECH® Plus Industrial Enamels are a full line of 100% acrylic waterborne enamels designed for direct-to-metal application. These products provide superior corrosion protection, chemical and solvent resistance, and are fast drying with low odor. Recommended for properly prepare interior and exterior metal, masonry, plaster and drywall surfaces. For professional use only.
Read More
PITT-GUARD® Rapid Coat Direct-to-Rust Epoxy
PITT-GUARD® is intended for interior/exterior use where barrier type protection is required for steel, aluminum, hot dipped galvanized stieel and masonry surfaces. It’s excellent wetting properties allow application and good performance over tightly adhering rust.
Read More
MULTI-PRIME® Low VOC*
MULTIPRIME® Low VOC* primers are inhibitive metal primers for use on ferrous metal or aluminum substrates. They may be top-coated with a variety of topcoats including epoxy, vinyl, urethane or conventional finishes. They may also be used as a barrier coat over existing alkyd systems to allow top-coating with strong solvent containing topcoats.
Read More
FAST DRY 2500
Fast Dry 2500 is an excellent single component, high gloss, fast dry vinyl modified alkyd enamel that is recommended for interior and exterior use on properly prepared and primed metal surfaces. Easy to apply and abrasion resistant, Fast Dry 2500 is ideal for product finish applications where a super fast dry gloss enamel is required for fast production and handling. For Professional Use Only.
Read More
AQUAPON® HIGH BUILD Semi-Gloss Polyamide-Epoxy Coating
AQUAPON® High Build Semi-Gloss Polyamide-Epoxy Coatings are high build, corrosion resistant finishes that have excellent hardness, abrasion and mar heavy-duty service in corrosive industrial atmospheres. Also can be applied over hot dipped galvanized steel, aluminum, masonry, well-cured plaster, cement fiberglass composite, wood or concrete.
Read More
AQUAPON® WB - Water Base Epoxy
AQUAPON® WB is a water-borne epoxy interior/exterior coating system for use in commercial, institutional or industrial environments or where a tough, impact, abrasion, mar and stain resistant coating is required. Suitable for use on properly prepared and primed steel, galvanized metal, aluminum, copper, plaster, concrete, masonry, and wood surfaces. Also recommended as a floor coating.
Read More
BREAK-THROUGH!® Interior/Exterior Paint
Break-Through! offers outstanding early block resistance and quick dry, resulting in fast turnaround and increased productivity. This product provides hardness similar to or better than standard alkyds with a low-VOC formula.
Read More